EasyPrint® Model Resin (Beige Opaque) 1000g Medisco Group

•  EasyPrint® Model Resin Model Water-Wash / 385nm and 405nm (1000g).

• Water-soluble – EasyPrint® Model Resin is used for the high-precision creation of 3D printed models with low shrinkage, highest fineness & a very smooth surface. It is known for its excellent detail reproduction capabilities and has been optimized for use with all major desktop and professional 3D printers, 385nm and 405nm wavelength.

•  This photopolymer resin stands out for its rapid UV curing and impressive stability, making it perfect for LCD displays. Its efficiency is unmatched by comparable resins on the market, and it’s compatible with DLP or SLA printers. Plus, its above-average flowability significantly reduces printing time.

Key features:

• Rapid UV curing
• Low odor
• Washable with water
• Excellent resolution
• Optimized for LCD displays, DLP, and SLA printers
• High flowability for reduced printing time
• Color: beige-opaque
• Capacity: 1000g
• Made in Germany  by Medisco Group

Resin parameters:

• 385 to 405 nm wavelength
• Shore Hardness (D): 84
• Viscosity (25°C): 200 MPa/s
• Liquid density: 1.20/cm³
• Bending strength: 58 Mpa
• Extensibility: 36Mpa
• Elongation fracture: 8.00%
• Young modulus : 2200 Mpa
• Shelf life: 18 months

Print Settings:

• Exposure time of the ground layers (4-12 layers) in seconds: 25-40s
• Exposure time of the model layers in seconds: 0.8-6s

Storage method:

Protect from light and store at room temperature. (Sunshine may harden the photosensitive resin.) It is recommended to store the resin at an ambient temperature of 15 to 35 °C. The lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality.

Post-processing:

Remove the model via the metal scraper and clean the model in the cleaning box with water to wash off the excess resins in less than 2 to 3 minutes. Then put the model in another cleaning box and clean it with water to wash off the excess resins in less than 2 to 3 min. The model is finally cleaned in a water-filled ultrasonic device in less than 1 to 2 minutes. After cleaning, dry the model with a dust-free cloth or an air gun. Possibly to harden the model in a hardening box at 35°C.